Hey guys! I made a little guide with this awesome tool!

Here's an introduction to the new software created by flash.tato and the.C0r3

This tool will allow you to create bootscreen that you can use only in conjuction with the new procedure discovered.
We wrote this tool as we discovered that the bootscreen from file needs to have byte sapped, and Motorola Bootscreen Replacer doesn't suffix for this as the Bootscreen in CG1 doesn't need bytes swapped.
There is also an option to unpack bootscreen and retrieve its image.
Images format supported are PNG,GIF,JPG,BMP.

I compiled all the stuff needed in this little pack

The pack contains:
- Minibootscreen Creator
- Seem 033F_0001
- XVI32

1.- Download the MiniBootscreen made by flash.tato and the.C0r3 (You'll need the .NET Framework 2.0 installed on your pc.

2.- You'll need an image in 240x320 in JPG,BMP,GIF,PNG <- choose what you like. Press the button "Create Bootscreen" and go to the image location.

3.- Then save it with the name called Motomain and the bootscreen file will be created!

4.- Now let's upload this file using your favorite P2K05 file manager, I prefer P2k Commander 4.9.6.

5.- The work isn't done yet, you need to download your Seem 0032_0001 and make this little seem edit:

Offset 8D Bit 6 Enabled

To make the seem edit I use XVI32 cause it's the better HEX editor ever seen.

6.- Now let's do the final step, upload the seem 033F_0001 available in the pack included in this guide.

Restart and guess what?

You will see the bootscreen replaced!!!!!!

thanks to OCM770 for the original guide